Where can i find Dell f/w for a G860Y 200Gb SSD please ?
hi there - Where can i find Dell f/w for a G860Y 200Gb SSD please ?Thank you in advance.
View Articlehow to view h200 raid10 topology?
For any other raid solutions (linux md, windows storage spaces/disk manager, oracle zfs, hp smartarry) I am able to view which drives belong to which mirror group (when I have four drives, I can see...
View ArticleStrange HDD noise when shutting down
Our T630 is equipped with a H330 + 18x3.5 HDD backplane.OS: Windows 2012 server R2 DCWhen I gracefully shutdown the server from Windows Start Menu, the stock Toshiba ACA100 HDD always makes very short...
View ArticleHow to disable the "Backplane connector not connected" message
Hello --I have a T630 that I am using as a test box, rebooting it frequently. As such, quick reboot time is important to me. To minimize reboot time, I removed the SAS controller from the server (as I...
View ArticlePoweredge Move From Software RAID to Hardware RAID Controller
We have a Dell Poweredge R420 that came from the factory with software RAID. We now want to add a RAID controller so we can configure for hardware RAID 10. Dell tells us that we cannot change it to...
View Article3 flashing amber lights on HDD
Good afternoon all,I will start by saying I'm not the "server guy" he is on holidays. so looks like its my problem now.Had a R930 "lock up" the other day where all the HDD lights became solid and the...
View ArticlePowerEdge 2900 adding hard drive
Hi I have PowerEdge 2900 server. I want to add a SAS hard drive. There are some data on it. I don't want to lose them. In Windows Disk manager doesn’t recognise them. I think that I need to initialize...
View ArticleRAID Level Migration
Hi,My PowerEdge R720 with PERC H710P Mini controller have 4 disks are RAID 0, I've added another and made it Global Hot Spare and I now want to migrate it to RAID 5.I've tried doing it through...
View ArticleClik here to view.
Disk firmware updates needed
I have an R710 with a Perc6/i controller, Openmanage says the disks firmware needs to be updated but I couldn't boot from the Nautilus flashdrive. My keyboard doesn't work in EFI boot mode, can't...
View ArticlePoweredge R710 hard drive online LEDs
Hi,I have an old R710 that we used to use as a diskless VMWare host (booting off SD card). I have repurposed it as a test server, and put in four SATA drives and a PERC H700 card from an old T410....
View ArticleHave replacement SAS drive that is flagged as incompatible
I have a PowerEdge R300 server with two ST2500620SS drives. Drive 0 was stuck on rebuild at 35%, with bad sectors in the SA log. I ordered a replacement, and it is flagged as incompatible....
View ArticleT130 Boot from On-Board SATA Not Available?
I am running a T130 with an H330 RAID card and all is well. However, I want to make use of the onboard SATA port to boot into a recovery drive. However, the BIOS only sees the onboard mini-SAS...
View ArticleDell T410 PowerEnd PERC H200 New Virtual Volume goes to top of list.
Hi,We have been using the T410 for a few years now and we decided to add 2 new drives to have more data storage. Currently the T410 has 2 1Tb drives (Slot0 &1) in RAID1.I added 2 new drives (Slot 2...
View ArticleR200 Server with Raid 1-How to replace a single failed drive
I have recently had a failure of one of my two 250 gig drives in a Raid 1 configuration. Like to know how to reload the failed drive after replacing it with an identical one through the use of the...
View ArticlePowerEdge T430 - No Raid - Can I mix different HDD/SSD types?
Hello,I am configuring a PowerEdge T430 for home server use. It does not host critical applications but thus doesn't need RAID. The dell configurator shows below error when I select SATA HDD & SATA...
View ArticlePoweredge T110 II , with SBS 2011 & PERC-H200
I inherited a T110 II, with SBS 2011 & PERC-H200. 2x 500GB drives in Raid 1 mode.Would it be possible to install Intel RST on this server so I can check Raid & Drive status? Or is there an...
View ArticleDell R510 with PERC H200
I have a Dell R510 with a PERC H200 running RAID 10 with 4 drives at 2TB each. I'm have a couple questions that I'm trying to figure out just having no luck. First I'm looking to expand my drive...
View ArticlePDR1024 drive mismatch detected
Hi,I've just installed PERC H310 mini controller to R620 server and can't get HDDs working with it. If I do insert SAS hdds (tried 146, 15k 300Gb 10k and 1Tb 7.2k) I am getting PDR1024 drive mismatch...
View ArticlePoweredge 2900 Flex Bay error (with no Flex Bay installed or intended to be...
Real stumper here. We have a Poweredge 2900 and are using a PERC 5/i RAID controller. BIOS, backplane, baseboard controller and RAID controller are all on current firmware now.On boot, the machine...
View ArticleNewbie: Missing disks on M610
Hi,I just bought a M1000e with M610 blades for training purposes. I popped in two Dell branded SAS drives but nothing is presented to Linux (run on SD card) and nothing is found during the BIOS POST....
View Article