I am running a T130 with an H330 RAID card and all is well. However, I want to make use of the onboard SATA port to boot into a recovery drive. However, the BIOS only sees the onboard mini-SAS controller and the H330 as well as the DVD ROM on the system. It does not seem to see anything plugged into the onboard SATA. However, in Windows, I can see it just fine and use it just fine. Any pointers on where in the T130 BIOS I can get the system to boot onto a drive plugged onto this port?
For reference, I'm using an mSATA card in that port using an mSATA to SATA adapter card. It's basically pass through so there should be no controller interfering with how the BIOS sees the mSATA device.