Cannot login into Windows Server 2003 after getting error in raid card on...
We having many T110 server. But last days one of my important server goes down, hdd degraded showing....thats mean my raid 1 one HDD failed. But after getting this error i cant login to my windows 2003...
View ArticlePowerEdge 2900 RAID 10 Failure
Hi All,I have a PowerEdge 2900 with a PERC 6/i Integrated controler. I've four SAS disks working as a RAID 10. Recently one of the disks failed. I just bought a new disk to replace it. Can I replace...
View ArticlePowerEdge 2850 was working, then OS failed, now will not even get to setup...
I have a PowerEdge 2850 with Windows 2000 Raid 1. here is my diary of grief: Day 1. Application failed and OS hung. Reboot produced a blue screen with suggestion that I ran chkdsk /r from the...
View ArticlePowerEdge 2800 - Installing SBS 2008 - PERC 4e/Di Issue
I am trying to install Small Business Server 2008 on my PowerEdge 2800 but after I configure and Initilize my drives inside the PERC Utility (RAID 1) I reboot and start to load Windows through the DVD....
View ArticleDell PowerEdge R420 - setting up RAID10 array
Hi. I'm now installing R420 server, and I have one question about physical disk mode. I'm entered BIOS, and changed SATA mode from "AHCI" to "RAID". Then I removed preinstalled RAID5 Virtual Disk, and...
View ArticleScrubbing instead of rebuilding!
I had a degraded container on a PERC 3/Di, it tried to rebuild but I had to cancel it, as I was more concerned at the time getting the OS installed on the remaining drive (which was a separate volume...
View ArticlePoweredge 1800 with CERC1.5/6 Adaptec 2610sa
I have a poweredge 1800 with an adaptec 2610sa sata raid controller card. It is basically the same card as the Dell CERC 1.5/6 sata controller. I had this working under windows 2008 R2 before. I...
View ArticleH700 R410 cabled drive chassis cable part number
Does anyone know the part number for the sas cable needed in a cabled drive chassis R410 for an H700? The cables connecting the 6/ir aren't long enough to reach the H700. Thanks.
View ArticleDell Power Edge R210ii
I have purchased a Dell Poweredge R210ii and seen that the perc 3000 raid card do not support linux/unix. Please help what raid card is in compatibility with linux and unix. thanks Tizanb
View ArticlePERC 5 add FlexBay to current array
Hi We have a PEC5 RAID5 Array in a PE2900 with 8 drives and need an additional two drives. We have a Flex Bay from a decomissioned PE2900 which we want to install in the server however our concerns...
View ArticleRaid options on T110 ii
I put a T110 II with 1240 processor and 32gb ram in a VMmware lab enviroment without any raid card option in it. Now I need a raid 10 with 4 pc-grade hd configuration due to a required test and I'm...
View ArticleUrgent Help on 2950 Problem
Hi, I have just purchased a used Dell 2950 server with raid controller ( 6 x sas config) without drives. I am trying to install a SATA 111 SDD drive and i have also tried a SAS 73g H/Disk but i set...
View Articler420 raid setup via command line
Is it possible to provision the storage, make a Virtual Disk via the UEFI via command line? I have a lot of servers that were sent with the wrong storage config and I wanted to configure them all with...
View Articlefastpath info
This worked for me, thanks for the info! (Well, I still have speed tests to do, but my point is, thank you for the heads up) That said, here's what I had to use: megacli -LDSetProp -WT -L0 -a0 megacli...
View ArticleDisk consistancy shows error on PowerEdge R710
Hello There, I see 2272 ID "Uncorrectable media error" even after checking the consistancy on VD 0. However, my drives are green in VD 0. This error getting repeated for every 7 days. I'm loaded with...
View ArticlePowerEdge R510- Upgrade Raid1 Disk or Add more disks and convert to Raid 5?
I have a PowerEdge R510, with a PERC H700 Integrated controller. Currently, I have 3 146GB disks wih one being a Hotspare. We have two Windows drives: C:\ & D:\ and we do not want to add additional...
View ArticleHardware RAID options on a Poweredge R720
Hi, I'm looking at buying a Poweredge R720 with 11 SAS 2.5 inch 900 GB drives and 5 SAS 2.5 inch 146 GB drives with a Perc H310 RAID controller. What I'd like to do is the following: Setup config as...
View ArticleHow to add additional larger drives to RAID-5 array on PERC 4e/Di which is...
I have a situation similar to this post: http://en.community.dell.com/support-forums/servers/f/906/p/19327594/19678204.aspx#19678204 I inherited a PowerEdge 2800, PERC 4e/Di running the following...
View ArticleWhere to get PERC H710 mini driver for centos?
Hi, May i know that where to get PERC H710 mini driver for centos 5.8 ? when i try to install elastix which build in on top of CentOS 5.8, it can't find the HDD. Hope somebody can help me
View ArticleSegate ST9300653SS HDD compatibility with PERC 6/i RAID controller
Hi, We tried to use SEAGATE ST9300653SS (firmware 0004) with RAID controller PERC 6/i (firmware 6.3.1-0003). Got the following errors in logs: 8018 (boot + 49s/DRIVE/WARN) - PD 02(e0x20/s2) is not a...
View Article