Segate ST9300653SS HDD compatibility with PERC 6/i RAID controller

Hi,

We tried to use SEAGATE ST9300653SS (firmware 0004) with RAID controller PERC 6/i (firmware 6.3.1-0003).

Got the following errors in logs:

 8018 (boot + 49s/DRIVE/WARN) - PD 02(e0x20/s2) is not a certified drive
 8021 (boot + 49s/DRIVE/WARN) - PD 03(e0x20/s3) is not a certified drive

At the same time looks like the HDD is compatible with Dell controllers, since I can see a firmware upgrade for the Segate HDD model available on Dell support WEB:

Could someone confirm, that this HDD firmware upgrade will help to make the HDD fully compatible with the RAID controller.

Vendor:               SEAGATE
Product:              ST9300653SS     
Revision:             0004
User Capacity:        300,000,000,000 bytes [300 GB]
Logical block size:   512 bytes
Logical Unit id:      0x5000c50055205717
Serial number:        6XN1NCQG0000N303ATA1
Device type:          <31>
Transport protocol:   SAS
Local Time is:        Wed Sep 26 15:05:21 2012 EEST

mfi0 Adapter:
    Product Name: PERC 6/i Integrated
   Serial Number: 1122334455667788
        Firmware: 6.3.1-0003
     RAID Levels: JBOD, RAID0, RAID1, RAID5, RAID6, RAID10, RAID50
  Battery Backup: present
           NVRAM: 32K
  Onboard Memory: 256M
  Minimum Stripe: 8k
  Maximum Stripe: 1M

mfi0 Firmware Package Version: 6.3.1-0003
mfi0 Firmware Images:
Name  Version            Date         Time      Status
APP   1.22.32-1371       Sep 12 2011  19:29:24  active
BIOS  2.04.00                                   active
BCON  1.1-46-e_15-Rel    Mar  2 2008  14:06:08  active
CTLR  1.02-015B          Jan 27 2009  12:02:58  active
PCLI  01.00-022:#%00005  Sep 18 2008  20:27:14  active
BTBL  1.00.00.01-0011    Nov 27 2007  18:29:20  active

--
Artem