I just got a R630 with H330 PERC card. It came with 2 SAS 600gb drives - works great. I want to add to or replace the SAS drives with SATA drives. All the literature says this is supported, but I cannot get the system to recognize the SATA drive I put in. Known good drive, pulled it out of a laptop. Both CTRL R into the PERC setup and F2 into system setup - doesn't show the drive. I've tried it on both halves of the backplane, tried it by itelf and with the recognized SAS drives. Tried other SAS drives, works OK. The sled indicator light is green, although after a while it goes to green flashing. Tried different SATA options in BIOS: ATA, AHCI, RAID.
↧